Firmware update

Select this setting item from Device settings on Setup.

Important

• The administrator password is required to change settings if it is enabled for changing settings using the operation panel.

You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Note

• Only Check current version is available when Disable LAN or Activate direct connect. is selected for Change LAN in LAN settings.

• Install update

  Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update.

  Important

  • When you use this function, make sure the printer is connected to the Internet.
  • If the firmware update is carried out, all faxes stored in the printer's memory are deleted.

  • You cannot start the firmware update under the following conditions:

    • While the printer is sending or receiving a fax
    • While the printer is storing the unprinted fax in printer's memory (memory reception)
    • When the unsent faxes are stored in the printer's memory

  Note

  • If the firmware update is not complete, check the following and take an appropriate action.

    • Check the network settings such as a wireless router.
    • If Cannot connect to the server. is displayed on the LCD, press the OK button and try again after a while.

• Check current version

  You can check the current firmware version.

• Update notification setting

  When ON is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the LCD.

• DNS server setup

  Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.

• Proxy server setup

  Performs settings for a proxy server. Follow the display on the LCD to perform settings.