skip to main text

Print settings

Select this setting item from Device settings in (Setup).

  • Prevent paper abrasion

    Use this setting only if the print surface becomes smudged.

    Important

    • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

  • Adjust horizontal print position

    Adjusts the print position when the left/right margins are not aligned.

    You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and +0.12 in. (+3 mm) centered on the horizontal center of the paper.

    Important

    • When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.

  • Print target for plain paper

    Select Text only or Text and photos for plain paper printing.

    Note

    • As print results, if you are conscious of unevenness or textures of granularity, select Text and photos.