skip to main text

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.

Important

  • When performing the print head deep cleaning, check the free space in the maintenance cartridge. If there is not enough free space, replace with the new maintenance cartridge. In the case of shortage of free space in the maintenance cartridge, a message is displayed and the cleaning cannot be performed.

  1. Check that printer is turned on.

  2. Press the Setup button, use the left right button to select Maintenance, and press the OK button.

  3. Use left right button to select Deep Cleaning and press OK button.

    The printer starts cleaning the print head deeply.

    Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 2 minutes.

  4. Check the print head condition.

    To check the print head condition, print the nozzle check pattern.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.