Other device settings

Important

• The administrator password may be required to change the settings.

• Date/time settings

  Sets the current date and time.

• Date display format

  Selects the date display format.

• Time zone

  Specifies the time zone according to a country or region you live in.

  Specifying the time zone to the printer allows you to display the correct time an e-mail was sent from the main unit on your mail software.

• Daylight saving time settings

  Sets daylight saving time (summer time).

• Key repeat

  Selecting ON lets you quickly display candidate numbers or characters by holding down the button during character entry.

• Original removal reminder

  Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

  Important

  • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

• Keyboard layout

  Select the keyboard layout from the following three types.

  • QWERTY

  • QWERTZ

  • AZERTY

• Ink level monitor

  • Reset ink lev. count

    Resets the remaining ink count.

    Important

    • After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

    • If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

• Force ink tank selection

  You can specify the ink to use.

  • All ink tanks

    Use both color ink and black ink.

  • Black only

    Use only black ink.

    Note

    • When any of the inks reached the lower limit line, printing and copying are disabled.

• Fixed print quality

  Specifies print quality when printing on plain paper.

• Screen lock settings

  Lock the screen to prevent the panel operation by someone other than the administrator.