Print settings
Select this setting item from Device settings in Settings.
-
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
-
Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
-
-
Adjust horiz. print position
Adjusts the print position when the left/right margins are not aligned.
You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and +0.12 in. (+3 mm) centered on the horizontal center of the paper.
Important
-
When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.
-
-
Print target for plain paper
Select Text only or Text and photos for plain paper printing.
Note
-
As print results, if you are conscious of unevenness or textures of granularity, select Text and photos.
-