Default Network Settings
LAN Connection Defaults
|
Item |
Default |
|---|---|
|
Network name(SSID) |
BJNPSETUP |
|
Wi-Fi security |
Disable |
|
IP address (IPv4) |
Auto setup |
|
IP address (IPv6) |
Auto setup |
|
Set printer name* |
XXXXXXXXXXXX |
|
Enable/disable IPv6 |
Enable |
|
Enable/disable WSD |
Enable |
|
Timeout setting (WSD) |
15 min. |
|
Enable/disable Bonjour |
Enable |
|
Bonjour service name |
Canon GX3000 series |
|
LPR protocol setting |
Enable |
|
RAW protocol |
Enable |
|
LLMNR |
Enable |
|
Wi-Fi DRX setting |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Wireless Direct Defaults
|
Item |
Default |
|---|---|
|
Network name(SSID) |
DIRECT-abXX-GX3000series *1 |
|
Password |
YYYYYYYYYY *2 |
|
Security method |
WPA2-PSK (AES) |
|
Confirm connection request |
Displayed |
|
2.4GHz/5GHz switch |
2.4GHz |
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)
*2 The password is specified automatically when the printer is turned on for the first time.
