Menu Structure
The * on the right side of an item indicates the default value.
Values may vary depending on your model, firmware version, and printer settings.
-
Ink information
This menu is displayed by selecting Ink icon.
Current estimated ink levels Replace Order ink now -
Paper settings
This menu is displayed by selecting paper information area.
Roll paper 1 Replace paper Feed/cut Remove paper Paper settings Width Length Type Advanced Buy paper Roll paper 2 Replace paper Feed/cut Remove paper Roll unit use settings Paper settings Width Length Type Advanced Buy paper Take-up mode Roll unit use settings Auto feed to take-up position Skip errors during take-up ON / OFF Wind up after cutting Enable / Disable Paper retention settings Release / Retain Use in take-up mode Use / Do not use Manual Replace paper Remove paper Paper settings Page size Width Length Type Advanced Buy paper -
MaintenanceTroubleshooting Nozzle Check Print Head Cleaning Cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 Deep Cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 System Cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 Print Head Alignment Auto (standard) Auto (advanced) Manual Paper feed adjustment Set priority Auto / Prioritize print quality / Prioritize length accuracy Adjust print quality Auto Manual Adjust feed length Print alignment pattern Change adjustment values -0.70% / -0.68% / ... / 0.68% / 0.70% Color calibration Auto adjust Enable/disable adjustment values Enable* / Disable Adjustment information Calibration guide settings Enable / Disable* Reset adjustment values Maintenance cartridge info Maintenance cartridge usage Replace Head Replacement Start head replacement. Replace cutter blade unit Platen cleaning Prepare to move Move indoors on the same floor Move indoors to a different floor Transport outdoors -
Job managementPrint job List of print jobs Saved job Job box list Job list Print the job list Job history Display job history Print job history Pause printing Enable / Disable* Delete all print jobs -
Print from USB flash driveFolder/file list Number of copies Preview Print settings
The lower items of this menu are the same as the lower items of Print from USB flash settings.
-
LAN settingsWi-Fi Connection Network name (SSID) Frequency Wi-Fi security Signal strength (%) IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic settings IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address Printer name Bonjour service name Settings Enable/disable Wi-Fi Enable / Disable Wi-Fi setup Easy wireless connect Manual connect WPS (Push button method) Other connection types WPS (PIN code method) Advanced Wireless Direct Connection Network name (SSID) Password Frequency Wi-Fi security No. of printers connected now IPv4 address IPv4 subnet mask IPv4 default gateway IPv6 link-local address MAC address Printer name Bonjour service name Settings Enable/disable Wireless Direct Yes / No Change network name (SSID) Auto update / OK Change password Change manually / Auto update Connection request confirmation ON* / OFF Advanced Wired LAN Connection IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic settings IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address Printer name Bonjour service name Settings Enable/disable Wired LAN Enable / Disable Advanced Print details -
Printer settingsTest print Nozzle Check Status print Status print (administrator) Print LAN details Print the print settings Print advanced paper settings Print job history Print menu map Print settings Print head movable width setting Data width* / Maximum movable width / Paper width Prioritize paper size Enable / Disable* Magnification level for borderless Large / Medium* / Small / Minimum PDF print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable / Disable* Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* JPEG print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* / Specify print job Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Print from USB flash settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* AirPrint print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / ICC profile (perceptual) / ICC profile (saturation) / ICC profile (relative) / ICC profile (absolute) / Monochrome Print resolution Standard* / Speed priority / Print priority Paper settings No Top/Btm Space (Save Paper) ON / OFF* Unidirectional printing Enable / Disable* Direct print settings from FTP Print settings 1 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* / Specify print job Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 2 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* / Specify print job Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 3 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* / Specify print job Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 4 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi / Specify print job* Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Default print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Print the print settings LAN settings
The lower items of this menu are the same as the lower items of LAN settings.
Web service setup Web service usage registration / Web service usage cancellation Issue registration code DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Web service inquiry Print from Canon server Paper-related settings Roll paper auto feed Enable* / Disable Media type selection method Manual / Auto detect / Auto with confirmation* / Use current media type Manage remaining roll amount Barcodes / Auto estimate* / Disable Roll amount warning settings 11m/36ft. / 9m/30ft. / 7m/23ft. / 5m/16ft.* / 3m/10ft. / 1m/3ft. Switch roll paper when low Enable / Disable* Roll paper auto switching Identify size* / Do not identify size Detect paper setting mismatch Pause / Display warning* / Do not detect / Hold job Paper retention settings Release / While feeding* Paper size recognition settings Cut sheet setting 1 A3+* / 13"x19" (Super B) Cut sheet setting 2 ISO B1* / 28"x40" (ANSI F) Roll paper setting 1 10 in Roll* / B4 Roll Roll paper setting 2 A3 Roll* / 300mm Roll Roll paper setting 3 300mm Roll / 12 in Roll* Roll paper setting 4 500mm Roll* / 20 in Roll Roll paper setting 5 20 in Roll / B2 Roll* Roll paper setting 6 A1 Roll* / 600mm Roll Roll paper setting 7 600mm Roll / 24 in Roll* Adjust roll unit Keep margin at cut sheet end Enable / Disable* Advanced paper settings Print advanced paper settings Add priority roll paper width Setting 1 Setting 2 Setting 3 Reset all detection priority data Reset paper settings for all paper Auto maintenance settings Auto nozzle check Standard* / 1 page / 10 pages / Disable Nozzle check error display Enable / Disable* System Cleaning frequency Standard* / Short Print pattern after new head ON* / OFF Ink ejection status check Auto fix* / Display warning / OFF Hard disk settings Output method Print* / Print (auto delete) / Save to job box Save first and print ON / OFF* Common job box settings Print* / Print (auto delete) File deletion settings Fast* / Fast secure / Secure / Secure (VSITR) Data deletion Fast Fast secure Secure Secure (VSITR) Monitoring service settings Enable/disable monitoring service Enable / Disable* Communication test Communication log Timing for ink level notification All colors 0% / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% GY 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% PBK 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% O 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% MBK 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% Y 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% M 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% C 0%* / 10% / 20% / 30% / 40% / 50% / 60% / 70% / 80% / 90% / 100% Check settings Warning notification settings Enable* / Disable Other printer settings Energy saving settings Auto power off 5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF Sleep timer 5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min. Use USB connection Use* / Do not use Date/time settings Date display format YYYY/MM/DD / MM/DD/YYYY / DD/MM/YYYY Time zone (GMT) 0 / +1 / … / +12 / -12 / … / -1 Length unit settings Meters / Feet/inches Buzzer settings Enable* / Disable EOP timer settings 1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes Job history sending settings Send / Do not send* Menu row height Wide* / Standard Ink level notifications lamp settings Standard* / Slow Language selection Firmware update Install update Check current version Update notification settings Yes* / No Show notifications (tool update) ON* / OFF DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Security settings Administrator password settings Remote UI and other tools / LCD, Remote UI, and other tools Operation restrictions Job history Restrict / Do not restrict* Remote UI Restrict / Do not restrict* Print from USB flash drive Restrict / Do not restrict* IEEE802.1X/EAP settings Enable/disable Enable / Disable* Search for EAP router Last authentication result Authentication TLS* / TTLS / PEAP Advanced setup User-ID Username Password Authentication server name Verify auth. server name Enable* / Disable Verify auth. server certificates Enable* / Disable Import/export settings Import Export Initialize printer settings -
Printer informationSystem information Hard disk information Error history Hardware error Recoverable error Paper feed/transfer error Usage Total print area Duty counter Head information Head alignment performance log Values applied with auto settings Paper thickness (head height) Transport unit vacuum strength
