Menu Structure
The * on the right side of an item indicates the default value.
Values may vary depending on your model and firmware version.
-
Paper menu (when roll paper is loaded)
This menu is displayed by tapping paper information area.
Replace paper Feed/Cut Remove paper Paper settings Width Type Advanced Buy paper -
Paper menu (when cut sheet is loaded)
This menu is displayed by tapping paper information area.
Replace paper Remove paper Paper settings Page size Type Advanced Buy paper -
Replace paper
-
Feed/Cut
This menu is displayed when roll paper is loaded.
-
LAN settings
This menu is displayed by tapping Network icon.
Wi-Fi Connection Network name (SSID) Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic settings IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wi-Fi Enable / Disable Wi-Fi setup Easy wireless connect Manual connect WPS (Push button method) Other connection types Manual connect (adv.) WPS (PIN code method) Advanced Wireless Direct Connection Network name (SSID) Password Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic settings IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wireless Direct Yes / No Update SSID/password Yes / No Wireless Direct network (SSID) Connection request confirmation ON* / OFF Advanced Wired LAN Connection IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic settings IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wired LAN Enable / Disable Advanced Print details -
Ink information
This menu is displayed by tapping Ink icon.
Current estimated ink levels Replace Order ink now -
Setup
This menu is displayed by tapping Setup icon.
Printer settings Test print Nozzle Check Status print Status print (administrator) Print LAN details Print the print settings Print advanced paper settings Print job history Print menu map Print the color chart Print settings Print head movable width setting Data width* / Maximum movable width / Paper width Prioritize paper size Enable / Disable* Magnification level for borderless Large / Medium* / Small / Minimum PDF print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable / Disable* Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* JPEG print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* / Specify print job Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Print from USB flash settings
Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* AirPrint print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print resolution Standard* / Speed priority / Print priority Print target Photo / Poster (fluorescent)* Paper settings No Top/Btm Space (Save Paper) ON / OFF* Unidirectional printing Enable / Disable* Direct print settings from FTP Print settings 1 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* / Specify print job Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 2 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* / Specify print job Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 3 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* / Specify print job Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Print settings 4 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi / Specify print job* Print target Photo / Poster (fluorescent)* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Oversize Enable* / Disable Save paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size* / Same size / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Line & pen manager Width correction Black/gray Color Processing options Warning display Enable / Disable* Default print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / FL spot color Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo / Poster (fluorescent)* Print the print settings LAN settings The lower items of this menu are the same as the lower items of LAN settings displayed by tapping Network icon.
Web service setup Web service usage registration / Web service usage cancellation Issue registration code DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Web service inquiry Print from Canon server Paper-related settings Keep media type Enable / Disable* Manage remaining roll amount Barcodes / Warning message only / Disable* Roll amount warning settings Roll amount 6 (earlier warning) / Roll amount 5 / Roll amount 4 / Roll amount 3 (standard)* / Roll amount 2 / Roll amount 1 (later warning) Detect paper setting mismatch Pause / Display warning* / Do not detect / Hold job Advanced paper settings Paper size recognition settings Roll paper setting 1 Roll paper setting 2 Roll paper setting 3 Roll paper setting 4 Roll paper setting 5 Roll paper setting 6 Roll paper setting 7 Keep margin at cut sheet end Enable / Disable* Auto feed at power on Enable* / Disable Add priority roll paper width Setting 1 Setting 2 Setting 3 Print advanced paper settings Reset paper settings for all paper Auto maintenance settings Auto nozzle check Standard* / 1 page / 10 pages / Disable Nozzle check error display Enable / Disable* System Cleaning frequency Standard* / Short Print pattern after new head ON* / OFF Hard disk settings Output method Print* / Print (auto delete) / Save to job box Save first and print ON / OFF* Common job box settings Print* / Print (auto delete) File deletion settings Fast* / Fast secure / Secure / Secure (VSITR) Data deletion Fast Fast secure Secure Secure (VSITR) Monitoring service settings Enable/disable monitoring service Enable / Disable* Communication test Communication log Timing for ink level notification Standard* / Earlier notification Warning notification settings Enable* / Disable Other printer settings Energy saving settings Auto power off 5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF Sleep timer 5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min. Use USB connection Use* / Do not use Date/time settings Date display format YYYY/MM/DD / MM/DD/YYYY / DD/MM/YYYY Time zone (GMT) 0 / +1 / ... / +12 / -12 / ... / -1 Sound control Keypad sound ON/ OFF* Alarm sound ON* / OFF Length unit settings Meters* / Feet/inches EOP timer settings 1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes Job history sending settings Send / Do not send* Language selection Firmware update Install update Check current version Update notification settings Yes* / No DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Security settings Administrator password settings Remote UI and other tools ／ LCD, Remote UI, and other tools Operation restrictions Job history Restrict / Do not restrict* Remote UI Restrict / Do not restrict* Print from USB flash drive Restrict / Do not restrict* IEEE802.1X settings Authentication Do not use* / TLS / TTLS / PEAP EAP-TTLS internal auth. method MSCHAPv2* / PAP Weak encryption restriction Restrict* / Do not restrict Weak certificate restriction Restrict* / Do not restrict Advanced setup User-ID Username Password Authentication server name Verify auth. server name Verify auth. server certificates Last authentication result Import/export settings Import Export Initialize printer settings Maintenance Troubleshooting Nozzle Check Print Head Cleaning Cleaning All colors / Pattern 1 / Pattern 2 Deep Cleaning All colors / Pattern 1 / Pattern 2 System Cleaning All colors / Pattern 1 / Pattern 2 Print Head Alignment Auto (standard) Auto (advanced) Manual Print head angle adjustment Paper feed adjustment Set priority Auto / Prioritize print quality / Prioritize length accuracy Adjust print quality Auto Manual Adjust feed length Print alignment pattern Change adjustment values -0.70% / -0.68% / ... / 0.68% / 0.70% Maintenance cartridge info Maintenance cartridge usage Replace Head Replacement Start head replacement. Replace cutter blade unit Platen cleaning Prepare to move Move on the same floor Transport outdoors Printer information System information Current version Printer name Serial number MAC address (Wi-Fi) MAC address (Wired LAN) Root cert. thumbprint (SHA-1) Root cert. thumbprint (SHA-256) Hard disk information Hard disk capacity Job box free space Error history Hardware error Recoverable error Paper feed/transfer error Usage Total print area Ink consumed Duty counter Head information Serial number Installation date Dot count (million dots) Head alignment performance log Values applied with auto settings Paper thickness (head height) Transport unit vacuum strength Total print area -
Job management
This menu is displayed by tapping Jobs icon.
Print job List of print jobs Saved job Job box list Job list Print the job list Print from USB flash drive Folder/file list Copies Preview Settings The lower items of this menu are the same as the lower items of Print from USB flash settings.
Start print Job history Display job history Print job history Pause printing Enable / Disable* Delete all print jobs
