skip to main text

Print settings

Select this menu from Device settings in Setup menu.

  • Prevent abrasion

    Use this setting only if the print surface becomes smudged.

    Important

    • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

  • Auto-switch to B&W

    Automatically convert the printing data from color to black & white. Disable this setting if an optional FINE cartridge is attached.

  • Paper print position

    Adjusts the print position when the left/right margins are not aligned.

    Select Rear tray or Cassette for the paper source. You can adjust their printing positions in increments of 0.004 in. (0.1 mm) between -0.08 in. (-2 mm) and +0.08 in. (+2 mm) to the right or left with respect to its center of the paper along the horizontal axis.

    Important

    • When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.