skip to main text

How to Perform Ink Flush

Ink flush consumes a great amount of ink.

Frequent ink flush can rapidly consume ink, so perform ink flush only when necessary.

Important

  • Before performing ink flush, check the remaining ink level. If the remaining ink level is below the single dot (a), refill the ink tank.

Perform ink flush following the procedure below.

  1. Make sure printer is turned on.

  2. Press Setup button.

    The Setup menu screen appears.

  3. Select Maintenance and press OK button.

  4. Select Ink Flush and press OK button.

  5. Check displayed message and press OK button.

  6. Check displayed message, select Yes and then press OK button.

  7. Check displayed message, select Yes and then press OK button.

    Ink flush starts.

Note

  • Do not perform any operations while ink flush is in progress. It takes approximately four minutes to complete.