Setting Items for Sending Faxes

If you select Fax TX settings after pressing the MENU button on the Fax standby screen, you can specify the settings of the scan contrast and the scan resolution.

Adjust the scan contrast and resolution following the procedure below.

1. Press the MENU button on the Fax standby screen.

   The Fax menu screen is displayed.

2. Select Fax TX settings, then press the OK button.

3. Select Scan contrast, then press the OK button.

4. Select the scan contrast, then press the OK button.

   

   The button decreases the scan contrast, and the button increases the scan contrast.

5. Select Scan resolution, then press the OK button.

6. Select the scan resolution.

   

   Note

   • The (asterisk) on the LCD indicates the current setting.

   Standard

   Suitable for text-only documents.

   Fine

   Suitable for fine-print documents.

   Extra fine

   Suitable for detailed illustration or fine-print quality documents.

   If the recipient's fax device is not compatible with Extra fine (300 x 300 dpi), the fax will be sent in the Standard or Fine resolution.

   Photo

   Suitable for photographs.

   Note

   • When sending a color fax, documents are always scanned in the same resolution (200 x 200 dpi). The image quality (compression rate) is determined by which scan resolution is selected, except that Extra fine and Photo provide the same image quality.

7. Press the OK button.

   The LCD returns to the Fax standby screen.