Setting Items for Copying

You can change the copy settings such as the page size, media type, and intensity.

In the copy mode, press the MENU button, use the button to select a setting item, then press the OK button.

Use the button to adjust each setting item, then press the OK button. The next setting item is displayed.

The LCD returns to the Copy standby screen when all the settings are complete.

Note

• The (asterisk) on the LCD indicates the current setting.

• Some settings cannot be specified in combination with the setting of other setting items or the copy menu.

• The settings of the page size, media type, etc. are retained even if the printer is turned off.

• Enlarge/Reduce

  Select the reduction/enlargement method.

  • Reducing/Enlarging Copies

  Ex:

  

  Note

  • This setting item is displayed under the following conditions.

    • When standard copying is selected

    • When Borderless copy is selected for Special copy

• Copy intensity

  Change the intensity (brightness).

  Ex:

  

  Note

  • If you select Auto adjust, load the original on the platen.

  • If you select Manual adjust, use the button to decrease the intensity or the button to increase it.

• Page size

  Select the page size of the loaded paper.

  Ex:

  

  Note

  • Some of setting items are not available depending on the country or region of purchase.

• Media type

  Select the media type of the loaded paper.

  Ex:

  

• Paper Source

  Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.

  Note

  • When Auto is selected, paper is fed from the paper source where the paper that matches the paper settings (page size and media type) is loaded.

• Print quality

  Select the print quality according to the original.

  Ex:

  

  Note

  • If you use Economy with the media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again.

    • Economy Mode

  • Select High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

• 4-on-1 layout

  Select the layout when copying four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.

  Ex:

  

  Note

  • This setting item is displayed only when 4-on-1 copy is selected for Special copy.

    • Copying Four Pages onto Single Page

• Collate

  Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

  • Collated Copying

  Ex:

  

  Note

  • This setting item is displayed when standard copying is selected.

• 2-sided

  Select whether to perform two-sided copying.

  Ex:

  

  Note

  • This setting item is displayed only when 2-sided copy is selected for Special copy.

    • Two-Sided Copying

• Stapling side

  Select the orientation and the stapling side of the printed paper.

  Ex:

  

  Note

  • This setting item is displayed only when 2-sided copy is selected for Special copy.

    • Two-Sided Copying