Default Network Settings
LAN Connection Defaults
Item |
Default |
---|---|
Change wireless/wired LAN |
Disable LAN |
Network name (SSID) |
BJNPSETUP |
Wi-Fi security |
Disable |
IP address (IPv4) |
Auto setup |
IP address (IPv6) |
Auto setup |
Set printer name* |
XXXXXXXXXXXX |
Enable/disable IPv6 |
Enable |
Enable/disable WSD |
Enable |
Timeout setting |
15 minutes |
Enab./disab. Bonjour |
Enable |
Service name |
Canon G6000 series |
LPR setting |
Enable |
RAW protocol |
Enable |
LLMNR |
Enable |
PictBridge commun. (Enable/disable) |
Enable |
DRX setting (Wired LAN) |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Wireless Direct Defaults
Item |
Default |
---|---|
Network name (SSID) for wireless direct |
DIRECT-abXX-G6000series *1 |
WL Direct dev. name |
DIRECT-abXX-G6000series *1 |
Password |
YYYYYYYYYY *2 |
Security method |
WPA2-PSK (AES) |
Confirm request |
Displayed |
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)
*2 The password is specified automatically when the printer is turned on for the first time.