How to Perform Ink Flush

Ink flush consumes a great amount of ink.

Frequent ink flush can rapidly consume ink, so perform ink flush only when necessary.

Important

• Performing ink flush when the remaining ink level is not enough may damage the printer.

• Before performing ink flush, check the remaining ink level of all colors. If the remaining ink level is below the single dot (a), refill the ink tank of corresponding color.

  

• When performing an ink flush, check the free space of the maintenance cartridge. Ink flush consumes a lot of ink, and the consumed ink is discharged to the maintenance cartridge. If the free space is low, replace it with a new maintenance cartridge. If the available capacity of the maintenance cartridge is low, a message is displayed and ink flush cannot be performed.

Perform ink flush following the procedure below.

1. Make sure printer is turned on.

2. Press Setup button.

   The Setup menu screen appears.

3. Select Maintenance and press OK button.

4. Select Ink Flush and press OK button.

5. Check displayed message and press OK button.

6. Check displayed message, select Yes and then press OK button.

7. Check displayed message, select Yes and then press OK button.

   Ink flush starts.

Note

• Do not perform any operations while ink flush is in progress.