skip to main text

LCD and Operation Panel

The standby screen appears when the printer is turned on.

When the Setup button is pressed, the display switches to setup menu screen.

Setup

In a menu or settings screen, use the left right button to select an item or option, and then press the OK button to proceed with the procedure.

Note

Network Status Indication

Wi-Fi setting and the network status indicate by the icon in the standby screen.

If the Wi-Fi icon appears on the standby screen, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router.

Depending on the signal state, the icon will change.

Signal strength: 81 % or more

You can use the printer over Wi-Fi without any problems.

Signal strength: 51 % or more

The problem such as the printer cannot print may occur according to the network status. We recommend placing the printer near the wireless router.

Signal strength: 50 % or less

The problem such as the printer cannot print may occur. Place the printer near the wireless router.

Wi-Fi is enabled but the printer is not connected to the wireless router.

Note

  • When Wi-Fi is disabled, the Wi-Fi icon is not displayed.