Other printer settings

• Date/time settings

  Sets the current date and time.

  • Setting Sender Information

• Date display format

  Selects the date display format.

• Daylight saving time setting

  Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region.

  • Start date/time

    Sets the date and time that summer time starts.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to start summer time will be displayed after specifying the items above and selecting OK.

    After specifying the shift time and selecting OK, you can specify the end date/time.

  • End date/time

    Sets the date and time that summer time ends.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to end summer time will be displayed after specifying the items above and selecting OK.

    Specify the shift time and select OK.

• Sound control

  Selects the volume.

  • Keypad volume

    Selects the beep volume when pressing the touch screen or the buttons on the operation panel.

  • Alarm volume

    Selects the alarm volume.

  • Line monitor volume

    Selects the line monitor volume.

  • Offhook alarm

    Selects the alarm volume when the phone receiver is not put on the hook properly.

• Country or region

  Selects the country or region where you are using the printer.

  Note

  • This setting may not be available depending on the country or region.

• Original removal reminder

  Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

  Important

  • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

• Wi-Fi pairing settings

  In order to connect Canon PRINT, multiple configurations will be performed.

  • Enable/disable pairing

    Set the printer's Wi-Fi pairing function to enable or disable.

  • Allow/block additional pairing

    On another function permit or prohibit Canon PRINT pairing.

  • Delete paired devices

    Cancel all Canon PRINT pairing.

• Keyboard settings

  Select the keyboard layout from the following three types.

  • QWERTY

  • QWERTZ

  • AZERTY

• Ink level monitor

  • Reset ink level count

    Resets the remaining ink count.

    Important

    • After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

    • If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

  • Remaining ink level notification

    Enables or disables the function which notifies the remaining ink.

    Important

    • If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality.

    • When changing the remaining ink level notification function from disabled to enabled, it is necessary to refill all ink tanks up to the upper limit line.

      • Refilling Ink Tanks

• Fixed print quality

  Specifies print quality when printing on plain paper.

• External server connection

  • Start external server connection

    Start external server connection.

  • Check ext. server connection

    Check external server connection.

  • Enable/disable screen lock

    Enable/disable screen lock when connected to an external server.

• Notification settings

  All notification screens are not displayed if you select OFF.