Memory Reception

The printer prints the received fax automatically by default. And furthermore, the printer stores the received fax in its memory. When the faxes are stored in the printer's memory, the FAX Memory lamp is lit or flashes.

In the following conditions, the received fax is not printed automatically, only is stored in the printer's memory. Then the message is displayed at the Fax standby screen.

• When Do not print is selected for Received documents in Auto print settings under Fax settings

• An error has occurred on the printer:

  If you select Print for Received documents in Auto print settings under Fax settings, a received fax will be printed automatically. However, if any of the following errors occurs, the received fax will not be printed. It will instead be stored in the printer's memory.

  When the error is resolved, the fax stored in the printer's memory is printed automatically.

  • Paper has run out:

    Load paper, then select OK.

  • A different size of paper from that specified by Page size in Fax paper settings is loaded:

    Load the same size of paper as that specified by Page size in Fax paper settings, and then select OK.

  • The amount of remaining ink is insufficient to print a fax:

    Refill ink tanks.

    • Refilling Ink Tanks

  • The maintenance cartridge is full:

    Replace the maintenance cartridge.

    • Replacing the Maintenance Cartridge

• You pressed the Stop button to cancel printing of a fax:

  Press HOME button and select Fax to resume printing of the fax.

Important

• When the printer's memory is full, the faxes stored latest overwrite those stored earliest. However, the unprinted faxes are not overwritten.

• If the printer's memory is full with the unprinted faxes, the printer cannot receive the faxes. Check the FAX Memory lamp regularly, print the faxes, and delete them from the printer's memory.

  • Document Stored in Printer's Memory

Note

• The printer can store up to max. 50 pages* (max. 20 documents) of faxes in the printer's memory.

  * When using ITU-T No.1 chart (Standard mode)

• If the printer's memory becomes full during memory reception, only pages which already have been received are stored in the memory. Print the received faxes stored in the printer's memory, and then delete them from the printer's memory and have the sender resend the faxes.

  • Document Stored in Printer's Memory

• We recommend you check printed pages immediately after faxes are received. If a fax remains in the printer's memory, you can reprint it after refilling the ink tank.