How to Do Ink Flush

Ink flush consumes a great amount of ink.

Frequent ink flush can rapidly consume ink, so perform ink flush only when necessary.

Important

• Performing ink flush when the remaining ink level is not enough may damage the printer.

  Before performing ink flush, check the remaining ink level of all colors. If the remaining ink level is below the single dot (a), refill the ink tank of corresponding color.

  

Perform ink flush following the procedure below.

1. Make sure printer is turned on.

2. Press Setup button.

   The Setup menu screen appears.

3. Select Maintenance and press OK button.

4. Select Ink Flush and press OK button.

   If ink notification is disabled, proceed to step 7.

5. Check displayed message and press OK button.

6. Check displayed message, select Yes and then press OK button.

7. Check displayed message, select Yes and then press OK button.

   Ink flush starts.

Note

• Do not perform any operations while ink flush is in progress. It takes approximately nine minutes to complete.