Performing System Cleaning

System cleaning consumes a great amount of ink.

Frequent system cleaning can rapidly consume ink, so perform system cleaning only when necessary.

Important

• Performing system cleaning when the remaining ink level is not enough may damage the printer.

  Before performing system cleaning, check the remaining ink level of all colors. If the remaining ink level is below the single dot (a), refill the ink tank of corresponding color.

  

Perform system cleaning following the procedure below.

1. Make sure printer is turned on.

2. Press Setup button.

   The Setup menu screen appears.

3. Select Maintenance and press OK button.

4. Select System cleaning and press OK button.

   If ink notification is disabled, proceed to step 7.

5. Check displayed message and press OK button.

6. Check displayed message, select Yes and then press OK button.

7. Check displayed message, select Yes and then press OK button.

   System cleaning starts.