skip to main text

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

  1. Check that printer is turned on.

  2. Press and hold the Stop button and release it when the Alarm lamp flashes 2 times.

    The printer starts cleaning the print head.

    The cleaning will be complete when the ON lamp lights after flashing.

    Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 to 2 minutes.

  3. Check the print head condition.

    To check the print head condition, print the nozzle check pattern.

Note