skip to main text

Specifications

General Specifications

Printing resolution (dpi)

4800* (horizontal) x 1200 (vertical)

* Ink droplets can be placed with a pitch of 1/4800 inch at minimum.

Interface

USB Port:

Hi-Speed USB

* A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

Print width

8 inches/203.2 mm

(for Borderless Printing: 8.5 inches/216 mm)

Printable area

Borderless printing: Top/Bottom/Left/Right margin: 0.0 inch (0.0 mm)

Standard printing:

-Top margin:

  • 0.12 inches (3.0 mm)

-Bottom margin:

  • 0.20 inches (5.0 mm)

-Left margin:

  • Letter/Legal: 0.26 inches (6.4 mm)
  • Other sizes: 0.14 inches (3.4 mm)

-Right margin:

  • Letter/Legal: 0.25 inches (6.3 mm)
  • Other sizes: 0.14 inches (3.4 mm)
Operating environment

Temperature: 41 to 95 °F (5 to 35 °C)

Humidity: 10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature and humidity conditions.

Recommended conditions:

Temperature: 59 to 86 °F (15 to 30 °C)

Humidity: 10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.

Storage environment

Temperature: 32 to 104 °F (0 to 40 °C)

Humidity: 5 to 95 % RH (no condensation)

Power supply

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Power consumption

Printing (Copy): 9 W or less

Standby (minimum): 0.6 W or less *1*2

Standby (all ports connected): 0.6 W or less

OFF: 0.2 W or less *1

*1 USB connection to PC

*2 The wait time for standby cannot be changed.

External dimensions

Approx. 17.6 (W) x 13 (D) x 6.5 (H) inches

Approx. 445 (W) x 330 (D) x 163 (H) mm

* With the Paper Support and Paper Output Tray retracted.

Weight

Approx. 13.9 lb (Approx. 6.3 kg)

* With the Print Head and ink tanks installed.

Print Head/Ink Total 1472 nozzles (BK 320 nozzles, C/M/Y each 384 nozzles)

Copy Specifications

Multiple copy max. 20 pages

Scan Specifications

Scanner driver

TWAIN 1.9 Specification, WIA

Maximum scanning size A4/Letter, 8.5" x 11.7"/216 x 297 mm
Scanning resolution

Optical resolution (horizontal x vertical) max: 600 x 1200 dpi

* Optical Resolution represents the maximum sampling rate based on ISO 14473.

Gradation (Input / Output)

Gray: 16 bit/8 bit

Color: RGB each 16 bit/8 bit

Minimum System Requirements

Conform to the operating system's requirements when higher than those given here.

Operating System

Windows 10, Windows 8.1, Windows 7 SP1

Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later.

.NET Framework 4.5.2 or 4.6 is required.

Hard Disk Space

3.1 GB

Note: For bundled software installation.

The necessary amount of hard disk space may be changed without notice.

Display XGA 1024 x 768
  • This printer cannot be used with the iOS, Android and Windows 10 S.
  • Internet connection or CD-ROM drive is required to install the software.
  • Internet connection is required to use Easy-WebPrint EX and all the user's guide.
  • Easy-WebPrint EX: Internet Explorer 8, 9, 10 and 11* (for Windows) is required.
  • Some functions may not be available with Windows Media Center.
  • TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating system.

Information in this guide is subject to change without notice.