skip to main text

Operation Panel

* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.

(1) ON button

Turns the power on or off.

(2) ON lamp
Lights after flashing when the power is turned on.

Note

  • You can check the status of the machine by the ON and Alarm lamps.

    • ON lamp is off: The power is off.
    • ON lamp lights: The machine is ready to print.
    • ON lamp flashes: The machine is getting ready to print, or printing is in progress.
    • Alarm lamp flashes: An error has occurred and the machine is not ready to print.
    • ON lamp flashes and Alarm lamp flashes alternately: An error that requires contacting the service center may have occurred.
(3) Alarm lamp
Lights or flashes when an error occurs. When performing machine maintenance or machine settings, options can be selected according to the number of flashes.
(4) Ink lamp
Lights or flashes when black or color ink runs out.
(5) Stop button

Cancels operation when print, copy, or scan job is in progress.

Holding this button down lets you select maintenance options or machine settings.

(6) Black button*
Starts black & white copying. You can also press this button to finalize your selection for the setting item.
(7) Color button*
Starts color copying. You can also press this button to finalize your selection for the setting item.

* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button.