skip to main text

Ink level monitor

Enabling the remaining ink level notification function / Resetting the remaining ink count

Important

  • If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

    After refilling the ink of all colors to the upper limit line of the ink tank, set a remaining ink level notification function to enable.

  1. Check that printer is turned on.

  2. Press and hold the Stop button and release it when the Alarm lamp flashes 6 times.

    The remaining ink level notification function is enabled, then remaining ink count is reset.

Disabling the remaining ink level notification function

Important

  • If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality.

  1. Check that printer is turned on.

  2. Press and hold the Stop button and release it when the Alarm lamp flashes 7 times.

    The remaining ink level notification function is disabled.