Initializing Printer Settings

Important

• When using the printer over Wi-Fi, note that initialization erases all network settings on the printer, and printing operation from a computer over Wi-Fi may become impossible. To use the printer over Wi-Fi, perform setup according to the instructions on our website.

Follow the procedure below to initialize the printer settings.

1. Check that printer is turned on.

2. Press and hold the Stop button and release it when the Alarm lamp flashes 11 times.

All the printer settings are initialized. The administrator password specified by Remote UI or IJ Network Device Setup Utility reverts to the default setting.

After resetting, perform setup again as necessary.

Note

• You cannot set the following setting items back to the default:

  • The current position of the print head
  • CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting