Clearing a Jammed Sheet

If a sheet jams, follow the steps below to remove it.
  1. Turn off the power to the printer.

     Turning the Printer On and Off

  2. Open the top cover.

  3. If the Carriage is out, move the Carriage out of the way, away from the paper.

    Important

    • Do not touch the linear scale (A), carriage shaft (B), or ink tube Stabilizer (C). Touching these may cause malfunction.

  4. Lift up the release lever.

  5. Pull the paper straight out from the front of the printer.

    After removing the paper check that no pieces are left inside the printer.

  6. If the Carriage is on the left, move the Carriage to the right until it stops.

    Important

    • Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn on the printer.

  7. Lower the release lever and close the top cover.

  8. Turn on the power to the printer.

     Turning the Printer On and Off