1476

Cause

Appropriate print head is not installed.

What to Do

Printing cannot be executed because the print head is not compatible with this printer.

If you are printing, press the printer's RESUME/CANCEL button to cancel printing.

Remove the print head and install a compatible print head following the steps below. This may resolve the error.

1. Open top cover.

   

2. Close ink valve.

   Tilt the ink valve lever tightly to the left.

   

3. Grab knob (A) on print head locking cover to open it.

   

4. Remove print head.

   

   Important

   • When removing the print head, handle it carefully so that ink does not spatter.
   • Do not touch the tube or other parts inside the printer. Touching these parts may cause the printer to malfunction.

   • Do not touch the gold terminal (B) or print head nozzles (C) on a print head. The printer may not print properly if you touch them.

     

5. Install appropriate print head.

   

6. Close print head locking cover and push it down.

   Press firmly the print head locking cover until it clicks into place.

   

7. Press down joint button.

   

   Important

   • Push the joint button firmly until it clicks into place; otherwise, printing may become impossible.

8. Open ink valve.

   Tilt the ink valve lever tightly to the right.

   

9. Close top cover.